Error code 0X80300024

Error code 0X80300024 Windows OS

Spread the love

Error codes are a common annoyance as technology has advanced. There are various kinds of errors that show up at different times, like 0xc00d36c4 may show up while trying to play specific audio or video files. Covering all errors is beyond the scope of this article; however, (https://validedge.com/error-code-0xc00d36c4/) covers the steps to follow when encountered with error 0xc00d36c4.

Like Error 0xc00d36c4, Error code 0X80300024 is one of a variety of common error codes that you might run into when attempting to update some version of a device running Windows OS. The error code 0X80300024 is followed by an error message saying something along the lines of “Windows cannot be installed at the selected location.”

Error code 0X80300024 refers to some sort of conflict with the hard disk partition that is the endpoint of the Windows installation in question – program or hardware. Anything from inadequate disk space on the destination drive or defective/corrupted installation media to a damaged, dying, or otherwise corrupted hard drive will cause error code 0X80300024

In comparison, the Windows Operating System has also been accompanied by error code 0X80300024 across all its versions. All Windows 7 and Windows 10 users are vulnerable to crashing on it when attempting to update Windows. Fortunately, error code 0X80300024 is not the end of the planet. Some of the most powerful solutions you can use to try to get rid of error code 0X80300024 are:

Solution 1: Delete any hard drives that are redundant or replace them with a new one.

Suppose you have more than one hard drive attached to your computer and are trying to install Windows on one of them. In that case, the installation can interfere with the other hard drive(s), resulting in failure of the installation and display of error code 0X80300024. 

Delete any hard drives that you do not wish to run Windows on from your computer to make sure this is not the case, then retry the installation to decide whether the problem continues or not. A dying hard drive will probably avoid installing an operating system such as Windows, but if anything else fails, upgrade the hard drive with a new one, which is bound to get rid of the 0X80300024 error message.

Solution 2: Attempt to insert the installation media into another USB socket.

If, as most people do, you choose to install Windows from a USB with the required installation media on it, the source of this issue may simply be the USB port to which the installation media is plugged. Try to mount Windows with the USB with the installation media inserted on it onto another USB port, switch from a USB 2.0 port to a USB 3.0 port, or vice versa, to see whether Windows can be installed successfully or not.

Solution 3: Use of DiskPart

In certain instances, if there is corruption in the partition tables of the drive, the error might be caused. Therefore, we will be using DiskPart in this phase to fix this problem. For that:

  1. Identify the “System” partition when all partitions are specified in the configuration, and note its name.
  2. Click “Shift” + “F10” and press “Diskpart” afterwards.
  3. Now, in order to list all the partitions, select ‘List disk.’ 
  4. Type ‘Pick Disk’ (The partition size, if it were 1, you would type Select Disk 1).
  5. Fill in ‘Clean’ now and click ‘Enter.’ 
  6. To see if the problem continues, search.

Solution 4: Make sure the Objective Drive is at the Highest Point of the PC’s Boot Request

You may be seeing the mistake code 0X80300024 in light of the fact that the hard drive you are attempting to introduce Windows on isn’t at the highest point of your PC’s boot request. On startup, each PC has a request for sources it attempts to boot the Operating System from, and this request is designed through the normal PC’s BIOS. To cure this issue, you should simply ensure that the objective hard drive is at the highest point of your PC’s boot request:

  1. Start your PC up.

On the main screen that you see when your PC boots up, you will discover guidelines to press a particular key – which, by and large, is Delete, F1, or F2 – to enter your PC’s BIOS/Setup. Press the key indicated to enter the BIOS. If it does not work with these ones, the key can also be found in the manual for your PC.

  1. In the BIOS, find your PC’s boot request/setup. By and large, the boot request is situated under the BIOS’s Boot tab.
  1. Change the boot request, so the hard drive you are attempting to introduce Windows is exceptionally top.
  1. While in the Bios, likewise guarantee that you have chosen “UEFI” as the boot mode. The choice ought to be in the “Boot” segment of Bios.
  1. Leave the PC’s BIOS, yet make certain to save what you have made to it before so much.

When done, restart the Windows establishment and see whether it experiences effectively.

These solutions can help you solve this error efficiently by yourself.

Also read about: How to Get Windows Classic Theme on Windows 10

Techsprohub-Team

Techsprohub is one of the most popular & trusted Gadget hub for Tech professionals. we provide a single source of technology, information and resources.

View all posts by Techsprohub-Team →

Leave a Reply

Your email address will not be published. Required fields are marked *